Search Results for ‘removal’

retrieved from gencoupe, OP dogstar It was a busy afternoon, I managed to get the passenger door panel off and take some measurements. Italyn, things look good for getting a reasonably shallow 8" mid woofer in there. The stock speaker is a plastic bodied speaker of approximately 6" diameter...

Retrieved this from gencoupe originally posted by ImportShark "Here's a step-by-step guide to removing your front bumper. This is a useful DIY because it is applicable to removing your OEM front grill (to install aftermarket grills or install wing emblems), installing OEM foglights, installing...

"ok guys, so I finally got around removing my bumper to do some anti-rust for the components behind it. So hopefully this will shed some light on all those people that wanted to know how to remove it either for changing the grill or doing some repair. As the HMAservice.com indicates you need...

Thanks to gencoupe.com 1. Disconnect the negative (-) battery terminal (A). 2. Remove the drain plug (A) and drain the engine coolant. 3. Remove the front muffler (A). 4. Disconnect the breather hose (A), vacuum hose (B). And remove the air duct (C) and air cleaner assembly (D). Tightening...

I was sifting through gencoupe.com stuff I missed lately being so busy over here & ran across this & thought it was a pretty cool DIY. 1. Disconnect the negative (-) battery terminal (A). 2. Remove the drain plug (A) and drain the engine coolant. 3. Disconnect the breather hose (A) and vacuum...

DIY Emblem Removal (Swapping Hyundai Badges for Tuscani) And if that's not forward enough, here's the video: YouTube - Hyundai Tiburon DIY - Emblem Removal Video Walkthrough