Hyundai Genesis Forum banner
1 - 20 of 30 Posts

· Premium Member
Joined
·
10,831 Posts
Discussion Starter · #3 ·
Nice.......

PowerAXEL, on a side note, I want this display that can give info on all my gauges etc (boost, RPMs, etc)
But, only if it is of good quality & not ridiculously expensive. See what you can do please.





 

· Registered
Joined
·
1,334 Posts
Tufast

We had initial plan for producing VID feature with 7.3 inch display unit like above, but display unit made by other competitor was better production cost than ours.

I'll ask my company in Korea to source the unit and post price soon.
 

· Premium Member
Joined
·
10,831 Posts
Discussion Starter · #5 ·
Tufast

We had initial plan for producing VID feature with 7.3 inch display unit like above, but display unit made by other competitor was better production cost than ours.

I'll ask my company in Korea to source the unit and post price soon.
Thank You



 

· Premium Member
Joined
·
10,831 Posts
Discussion Starter · #12 ·
For $120, you can buy this cover only and add your own navigation system
I'll buy that facia trim piece (the one w/o coupe on it) once you let me know about the gauge display I posted above & I purchase it.



 

· Premium Member
Joined
·
10,831 Posts
Discussion Starter · #18 ·
I was hoping there would be, the infinity package has an amp for the sub, right? Or does it use a different head unit?
The "premium" sound found in the upper level coupes that incorporates an amp, sub & center stage is as follows:
Tuner - part# 96190-2M120
Amp - part# 96370-2M000 (JBL)
Sub - part# 96380-2M300 (JBL)
Center stage part# 96320-2M050
Front speakers part# 96330-3J200
Left rear speaker part# 96330-2M150
Right rear speaker part# 96330-2M250

The "low end" audio found in the base model & R-specs that has no amp, sub or center stage is as follows:
Tuner - part# 96180-2M100
Front speakers part# 96330-2M000
Left rear speaker part# 96330-2M100
Right rear speaker part# 96330-2M200



 

· Premium Member
Joined
·
10,831 Posts
Discussion Starter · #20 ·
Nuts, I was hoping for a 'clean' install to add an 8" sub in the factory location & small amp to drive it. Looks like it's speaker to line level outs.
That's what I'm doing with single Punch 8" DVC & 300w mono amp mounted in factory spot in deck.



 
1 - 20 of 30 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top